Analyse-liste

analyse2

  • GASOLINE - KEROSINE - JET FUEL - NAPHTHA
    TEST ASTM IP DIN OTHER
    Acidity in aviation fuel D 3242
    Acidity incl. Distilation D 1093
    Aniline Point D 611 2 51775
    Aniline / Gravity Product D 611/ 4052
    API Gravity (incl. Density) Tabel 3
    Appearance D 4176
    Aromatics Hydrocarbons Total D 5580
    Aromatics Hydrocarbons Total 391
    Ash D 482 4 ISO 6245
    Benzene by Gas Chromatography D 3606
    Benzene by Infrared Spectrometry D 4053
    Bromine Number D 1159 (mod)
    Bromine Index D 2710 (mod)
    Chloride Content in Organic Products D 914
    Cloud Point (to max -40°C) D 2500 219 ISO 3015
    Cloud Point (to max -65°C) D 2500 219 ISO 3015
    Colour, Saybolt D 156 51411
    Conductivity D 2624
    Copper Corrosion D 130 154 51759 ISO 2160
    Density PAAR D 4052 51757D ISO 3675
    Distillation D 86 123 51751 ISO 3405
    Doctor Test D 4952 30 ISO 5275
    FIA D 1319 156 ISO 3837
    Flash Point, Pensky-Martens D 93 34 51758 ISO 2719
    Flash Point, Setaflash D 3828
    Freezing point of aviation fuel D 2386 16 51421 ISO 6246
    Furfural test 297 SDM 025-99
    GC analysis
    Gum, existent / unwashed D 381 131 ISO 6246
    Gum, unwashed/washed mogas D 381 131 ISO 6246
    Gum, Potential D 873 138 51799
    Infrared Analysis
    Lead in gasoline D 3237 362 51769/T7 AAS
    Lead in gasoline 428 EN 237-97
    Lead in Aviation gasoline D 3341
    Mercaptan sulphur D 3227 342 51796
    MSEP-A Rating D 3948
    Napthalenes in aviation fuels D 1840
    Octane number – MON D 2700
    Octane number – RON D 2699
    Oilcontent in two stroke gasoline D 381
    Oxidation stability of gasoline D 525 40 51780
    PIONA GC
    Polycyclic aromatics in petrol. Fract. 346
    Particulate matter cont. Of jet A1 D 2276
    Phosphorous in Gasoline SMS 1648
    Pour Point, upper (to -39°C) D 97 15 ISO 3016
    Pour Point, upper (to -69°C) D 97 15 ISO 3016
    Salt content as NaCl 77
    Silver corrosion 227
    Simulated distilation (Gasoline) D 3710
    Smoke point D 1322 57
    Specific Energy, net D 3338
    Sulphated Ash D 874
    Sulphur D 4294
    Sulphur D 4045
    Sulphur, Mercaptan D 3227
    Thermal stability (JFTOT) D 3241 ISO 6249
    Toluene content in aviation gasoline D 3606
    Toluene content in gasoline D 3606
    Vapour Pressure (Reid) method A/B D 323 69 51754
    Viscosity at -20°C D 445 71 51366
    Water reaction of aviation fuels D 1094 289
    Water, Karl Fischer D 1744 51777/T1
    Xylene content in aviation gasoline GC

    Note: Analysis performed by other Saybolt Laboratory: Forwarding costs applicable

  • GASOIL - FUELOIL - MARINEFUELS
    TEST ASTM IP DIN OTHER
    Acid number (TAN) D 664/974 177 51588/T1 ISO 6618
    Acid number strong (SAN) D 664/974 177 51588/T1 ISO 6618
    Aniline / Gravity Product D 611 / 4052
    Aniline point D 611 2 51775
    API Gravity, incl. Density Tabel 3
    Appearance D 4176
    Ash D 482 4 ISO 6245
    Asphalthenes 143 51595
    Bacteria (Yeast/Fungi) Eacicult
    Bromine Index D 2710 (mod)
    Bromine Number D 1159 (mod)
    Bromine Number (On Ovhd. Fractions) D 1159 (mod)
    Calorific Value (Incl. Parameters) D 4868 ISO 8217
    Calorific Value D 240
    Calorific Value (Calculated) D 4868
    Cetane Index (Calculated) D 4737 / D 976
    Cetane Index (Incl. Dens. and Dist.) D 4737 / D 976
    Cetane Number D 613
    Chloride content in Water as NaCl SDM 016/96
    Chloride content in Organic Products D 914
    Chlorine organic, Halogens SSAB 1107
    Chlorine inorganic SSAB 1107
    Cloud point (to -40°C) D 2500 219 ISO 3015
    Cloud Point (to -65°C) D 2500 219 ISO 3015
    Cold filter plugging point (to -20°C) 309 EN 116
    Cold filter plugging point (to -40°C) 309 EN 115
    Colour ASTM D 1500 196 ISO 2049
    Compatibility D 4740
    Conradsen carbon residue D 189 13 51551
    Conradsen corbon (On 10% residue) D 189 13 51551
    Copper corrosion D 130 154 51759 ISO 2160
    Density PAAR D 4052 51757D ISO 12185
    Distillation D 86 123 51751 ISO 3405
    Distillation (Vacuum) D 1160
    Du Pont Stability test F 21 61
    Flash point, Pensky-Martens D 93 34 51758 ISO 2719
    Furfural Test 297 SDM 025-99
    Hot filtration test, Existent SMS 2696
    Hot filtration test, Accelerated SMS 2696
    Ignition Quality (CCAI) Calculated
    Ignition Quality (CCAI) incl. Parameters
    Iodine Value (WIJS) ISO 3961-96
    Infrared Analysis FT-IR
    Lubricity (HFRR) D 3076
    Mercaptan Sulphur D 3227
    Microscopy Exsamination
    Microbial test 385
    Nitrogen in Fuel Oil D 3228
    Nitrogen in Gasoil (A) D 4629
    Oxidation stability, acc. Method D 2274
    PCB (calib. With arochlor 1254) 51527 T1
    PCB Content 51527
    Polycyclic aromatics in petr. Fractions 346
    P-Value SMS 1600-83
    Pour point (to -39°C) D 97 15 ISO 3016
    Pour point (to -69°C) D 97 15 ISO 3016
    Salt content as NaCl. 77 51576
    Sediment by extraction D 473 53 ISO 3735
    Simulated distillation – Gasoil D 2887
    Sulphated Ash D 874
    Sulphur D 4294
    Sulphur D 5453
    Sulphur, Mercaptan D 3227
    Texaco haze test SP-423
    Toluene equivalent AM-S79004
    Viscosity Kin (between -50°C and +20°C) D 445 71 51366 ISO 3104
    Viscosity Kin (between +20°C and +150°C) D 445 71 51366 ISO 3104
    Water and sediment D 2709
    Water and sediment D 1796
    Water by distillation D 95 74 1/2 ISO 3733
    Water, K.F. coulometer D 1744 51777/T1
    Xylene equivalent BP 230/75
    Metals:
    Trace Metals in Gas Turbine Fuels D 3605
    (Ca, Na, Pb, V)
    Metals (Si + Al) IP 377
    Metals (Ni + V + Na) IP 288 735/1020/1300
    Metals in Fuel (ashing, fusion, ICP) IP PM-CB/02
    (Al, Si, V, Ni, Fe, Na)
    Sodium (Na) by AAS IP 464

    Note: Analysis performed by other Saybolt Laboratory: Forwarding costs applicable

  • LUBRICATING OILS
    TEST ASTM IP DIN OTHER
    Acid number strong (TAN) D 664 17 51588/T1 ISO 6618
    Acid number (SAN) D 664 17 51588/T1 ISO 6618
    Air Release at 50°C 313/77
    Antifreeze in lub oils FT-IR
    Antifreeze in lub oils GC
    Ash D 482 4 ISO 6245
    Base number (TBN) D 2896
    Cast Iron Corrosion 125
    Chloride Content in Organic products D 914
    Congealing Point of petroleum waxes D 938
    Copper Corrosion D 130
    Density PAAR D 4052 51757D
    Dropping point of grease D 566
    Dynamic Viscosity 10°C from Dropping pt. D 3236
    Ethylene glycol in used lub oil GC
    Flash point, Pensky-Martens D 93 34 51758
    Flash point, Cleveland open cup D 92
    Foaming characteristics D 892
    Fuel diluent in engine oil by distillation D 322 23
    Fuel diluent in engine oil by GC D 3524
    GC analysis GC
    Infrared analysis FT-IR
    Insolubles in pentane D 893
    Insolubles in pentane, Coagulated D 893
    Insolubles in toluene D 893
    Microscopy examination
    Millipore filtration, quantitative D 4055
    Noack test 51581
    Penetration of petroleum waxes at 25°C D 1321
    Pour point (to -39°C) D 97 ISO 3016
    Pour point (to -65°C) D 97 ISO 3016
    Partikkel count ISO 4406
    Sabonification Number of petroleum prod. D 94
    Solvent extractables in petroleum waxes D 3235
    Sulphated Ash D 874
    Sulphur D 4294
    Viscosity, Kinematic (20 to 150°C) D 445 71 51366
    Viscosity, dynamic (-10 to 25°C) Brookfield
    Viscosity, dynamic (30 to 100°C) Brookfield
    Viscosity index, incl. Visc. At 40/100°C D 2270
    Viscosity Index, calc. D 2270
    Water by Karl Fischer D 1744
    Water Seperability of petr. oils at 54°C D 1401
    Metals from additives / wear metals
    (1 to 5 metals) (@)
    D 5185
    Metals, wear in used oil
    (1 to 9 metals) (@)
    D 5185
    (@) Metals from additives:
    Calcium – Magnesium – Zinc – Barium – Phosphorous
    (@) Wear metals in used oils:
    Lead – Tin – Boron – Iron – Silicium – Chrom – Aluminium – Copper – Vanadium

    Note: Analysis performed by other Saybolt Laboratory: Forwarding costs applicable

  • CRUDE OILS
    TEST ASTM IP DIN OTHER
    Acid number (TAN) D 664/974 177 51588/T1 ISO 6618
    Acid number (SAN) D 664/974 177 51588/T1 ISO 6618
    Ash D 482 4 ISO 6245
    Asphalthenes 143 51595
    Chloride Content in Water as Nacl SDM 016/96
    Density PAAR (API gravity) D 4052 51757D ISO 12185
    Distillation D 86 123 51751 ISO 3405
    Iodine Value (WIJS) ISO 3961-96
    Pour Point (upper) D 5853 (A)
    Pour Point (Lower) D 5853 (B)
    Salt 77
    Sulphur D 4294
    Viscosity, Kinematic (20 to 150°C) D 445 71 51366 ISO 3104
    Water and sediment D 4007 359
    Water by Karl Fischer D 1744
    Wax content at -30°C BP

    Note: Analysis performed by other Saybolt Laboratory: Forwarding costs applicable

  • CHEMICALS - SOLVENTS - WATER
    TEST ASTM IP DIN OTHER
    Acidity as acetic acid D 1613
    Aniline / Gravity product D 611 / 4052
    Aniline point D 611 2 51775
    Appearance Visual
    Aromatics in Hydrocarbon Solvents SMS 2728
    Barytes Evaluation OCMA no. DFCP-3
    Chloride Content in water as NaCl. SDM 027/99
    Chloride Ions content D 4458
    Colour hazen BS 5339
    Colour, Saybolt D 156
    Density PAAR at 15°C D 4052 51757D ISO 12185
    Density PAAR at 20°C D 4052 51757D ISO 12185
    Distillation D 1078
    Distillation D 86 123 51751 ISO 3405
    Flash point, Pensky Martens D 93 34 51758
    Flash point, Setaflash D 3828
    Freezing point, water/antifreeze D 1177
    Furfural test SDM 025/99
    Gas Chromatography analysis GC
    Infrared spectrophotometry FT-IR
    Oil content in water DS R/209
    Oil and Grease in water DS R/209
    pH of antifreeze D 1287
    pH pH meter
    pH pH paper
    Permanganate time BS 509/2/9
    Refractive index at 20°C D 1218
    Residue on evaporation BS 4524
    Reserve of alkalinity in antifreeze D 1121
    Saponification Number of Petr. Products D 94
    Sulphur D 4045
    Sulphate Ions Content D 4130
    UV Scanning UV
    Viscosity at 20°C D 445 71 51366
    Water content, Karl Fischer D 1744
    Water miscibility D 1722
    Water content in Acetone BS 2511

    Note: Analysis performed by other Saybolt Laboratory: Forwarding costs applicable

  • CALIBRATION OF INSTRUMENTS
    TEST METHOD
    Density standard, each density at one temperature ASTM D 4052
    Calibration of Hydrometer ASTM E 126
    Calibration of Hydrometer with termometer ASTM E 126 + E77
    Viscosity standard, each viscosity at one temperature ASTM D 445
    Viscosimeters ASTM D 445
    Thermometers, each temperature (-75 to 350°C) ASTM E77

    Note: Analysis performed by other Saybolt Laboratory: Forwarding costs applicable

top